#2 HALF HITCH KNOTES SERIES#

To form the knot, take the rope or cord in the lefthand and make a loop, then in the right hand make a second loop, and put thisthrough the first and pull on the main part of the rope. When it is reversedit becomes a running knot. This type of knot is used to secure a cord or line or rope to a fixed object. portant may be mentioned the tying down of cork bottles. Ideally, a Taut-line should be applied to a properly-angled stake driven into the ground. The round turn and two half-hitches is a great knot for this scenario. Just tying the knot in the air without attaching it to an object should be avoided!Īll of the above applies to the TAUT-LINE HITCH as well. Its strength is in the round turn (the two wraps around what it is tied to) and the two half hitches are there to keep it in place. It is used to secure the end of a rope to a strong point. In lieu of a designated hitching pole, tables and chairs can be utilized. This is probably the most useful hitch in the book, and one of the simplest too.

#2 HALF HITCH KNOTES SERIES#

When illustrating how Two Half Hitches is used to attach a guyline to a dining fly, it’s ideal to have the side of a tarp sporting a series of grommets rigged up as a shoulder-high prop. During skills instruction sessions for hitches, there should be a hitching pole set up and accessible. Therefore, Scouts should be taught to tie it correctly, and then, of course, be given repeated opportunities to use it in the field on outings.Īs with any rank-required knot or lashing, Scouts NEED to put the skill into action in a way that reveals how it’s used. THIS IS A MISTAKE! IT yields a knot that just won’t hold as well. If you don’t, or if unfortunately you learned it wrong, you get a Cow Hitch which is a Larks Head tied around the standing part.

The fact is, it’s the kind of knot that you have to pay attention to when tying. It is mostly used for securing fairly heavy items. The first part takes the initial strain and controls the load as you complete the knot. Two Half Hitches is one of the first required knots on the advancement trail, and should be tied correctly every time. Round turn and two half hitches: This is stronger than the first variation and the double half hitch because it is a combination of two elements that provides a more dependable knot.

(Note: for attaching a guyline to a pioneering structure, the knot is used in conjunction with an initial roundturn, and for added security, the running end is seized to the standing part with some binder twine or cord.) When properly tied, under normal circumstances, it can be relied upon to hold fast to the object. Continue around to add a final Half Hitch. Tighten to make it secure (this introduces a slight dog-leg in the main rope). Tuck the rope between the standing end and the first turn. Continue around going over the first turn. The name refers to the components used to. Pass the end around the main (red) rope to make a Half Hitch. If the tension is away from the standing rope or pole, this knot is likely to fail.For practical purposes, the basic TWO HALF HITCHES (Double Half Hitch) repeatedly comes into play. The round turn and two half hitches knot is a very useful knot used to secure the end of a rope to a fixed object.

The “pull” MUST be in line with the main rope (or the pole). A Rolling Hitch will not hold at all in such materials.Ĭritical Details: The animation correctly shows that the blue rope is parallel to the red. Warning: Some modern ropes are very slippery, e.g., Spectra ®, Dyneema ®, and Polypropylene. Dana’s nomenclature was adopted by subsequent authors including Ashley who applied the name Magnus Hitch to the variation of the Rolling Hitch in which the final half hitch is passed around the standing end in the reverse direction and “tends to obviate torsion or twisting” ( ABOK # 1736, p 298). Until then it was known as the Magnus Hitch or Magner’s Hitch and the name Rolling Hitch had been applied to the Round Turn and Two Half Hitches. Naming: Richard Dana published The Seaman’s Friend in 1841 and applied the name Rolling Hitch as we use it today. To attach a rope to a pole see Version 1 below. That makes it great for attaching to furniture but terrible for attaching directly to a person. CAUTION: this knot constricts when you pull on the rope. Description: The Rolling Hitch Knot – Ashley Version 2 ( ABOK # 1735, p 298) attaches a rope (usually smaller) to another (usually larger) when the line of pull is almost parallel. 3 Make a half hitch by going under and around the standing part, then under the working end.

2 half hitch knotes